YASKAWA 1000 Series Installation Manual page 11

Table 4 Item Names and Part Numbers (Sold Separately)
Item
Digital Operator Cable 1 m (3 ft.)
Digital Operator Cable 3 m (10 ft.)
Installation Support Kit A
Installation Support Kit B
<1> Digital Operator Cable: Used to connect the digital operator to the drive (sold separately).
<2> Use Installation Support Kit B when weld studs are on the back of the panel.
◆
Tool Requirements
The tools listed in Table 5 are required to install the option on an enclosure panel door.
Installation Location
External/Face Mount
Internal/Flush Mount
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
Yaskawa Part Number
WV001
Part number for the Americas:
<1>
UWR0051
WV003
Part number for the Americas:
UWR0052
<1>
EZZ020642A
EZZ020642B
<2>
Table 5 Required Tools
Installation Support
Installation Support Kit A
Installation Support Kit B
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
Sold Separately;
For use with holes through the
Sold Separately;
For use with panel-mounted
threaded studs
– Phillips screwdriver, M3
Phillips screwdriver, M3, M4
Phillips screwdriver, M3
Box end or adjustable wrench, M4
3 Receiving
Notes
panel
Required Tools
Page
26
26
25
25
11