YASKAWA 1000 Series Installation Manual page 29

Example: Basic Operation
■
The following procedures are examples of drive operation using the option.
Note: Actual LCD display data varies based on drive parameter settings.
Procedure Example: RUN/STOP
Note: If b1-01 is not set to 0 (Operator), press
1. Apply main power to the drive. The Frequency Reference appears after the initial
display on the option.
2. Press to show the display for inputting the frequency reference.
If b1-01 is not set to 0 (Operator), press
3. Press
F1
reference changes to 006.00 Hz.
4. Press to set the output frequency.
YASKAWA ELECTRIC TOBP C730600 29G 1000-Series Option JVOP-180 Installation Manual
Procedure
LO
RE
F2
LO
to set LOCAL.
RE
to set LOCAL.
until the frequency
6 Basic Operation
LCD Display
- MODE - DRV Rdy
FREF (OPR)
U1-01= 0.00Hz
U1-02= 0.00Hz
LSEQ
U1-03= 0.00A
LREF
JOG FWD FWD/REV
-MONITR- DRV Rdy
FREF (d1-01)
U1-01= 000.00Hz
0.00 60.00
0.00Hz
← →
FWD
-MONITR- DRV Rdy
FREF (d1-01)
U1-01= 006.00Hz
0.00 60.00
0.00Hz
← →
FWD
Entry Accepted
29