Table of Contents
Advertisement
Installation into a Rack without Threaded Screw Holes
5020-A2-GN10-60
Procedure
After installing the appropriate brackets on the chassis:
1. Determine where the chassis will be placed in the rack. Mark the front rail
where the four holes in the mounting brackets will be.
2. Slide a self-retaining nut onto each marked rail hole and align the hole of the
nut with the hole in the rail.
Self-Retaining
Nut
3. Line up the chassis mounting brackets with the self-retaining nuts.
4. Loosely install the bottom screws first and then the top screws.
5. Tighten all screws firmly using a Phillips screwdriver.
Repeat the process for each chassis. Chassis can be mounted directly on top of
each other.
Front Rail
Screw
April 2000
00-15436-02
9
Advertisement
Table of Contents
