Installation into a Rack with Threaded Screw Holes
10
Procedure
After installing the appropriate brackets on the chassis:
1. Determine where the chassis will be placed in the rack.
2. Line up the chassis mounting brackets with the front rail holes.
3. Loosely install the bottom screws first and then the top screws.
4. Tighten all screws firmly with a Phillips screwdriver.
Repeat the process for each chassis. Chassis can be mounted directly on top of
each other.
Front Rail
Screw
April 2000
99-15435-01
5020-A2-GN10-60