Table of Contents
Advertisement
POTS Splitter Chassis Installation
Planning the POTS Splitter Chassis Installation
5020-A2-GN10-60
The POTS splitter chassis, 8600 Series and 8800 Series DSLAMS, and 8820
GranDSLAM are shipped with mounting brackets that allow them to be mounted
in a 19 or 23 cabinet or rack.
19" Cabinet
POWER
ALARMS
A
B
Fan
Major Minor
Hotwire
88x0
DSLAM
A
B
Chassis
POWER
ALARMS
A
B
Fan
Major Minor
B
A
To plan the bracket and chassis installation, determine:
Whether the DSLAM will be rack-mounted. If your Hotwire 8600 Series
DSLAM chassis is being placed on a tabletop, install the rubber feet as
shown on page 5. Discard the rubber feet for any rack-mounted chassis.
Width of the rack: 19 or 23 .
Chassis position in the rack: center-mounted or front-mounted.
Center-mounting is recommended for convenient access to cables.
Whether the rack has mounting rails with threaded or non-threaded screw
holes.
NOTE:
Install chassis in the rack from the bottom up to maintain stability.
POTS
Splitter
6-Slot
Chassis
April 2000
19" Rack
TM
TM
99-15426a-03
7
Advertisement
Table of Contents
