Table of Contents
Advertisement
M/SDSL Port Cards: Determining the Software
Revision Level
M/SDSL Port Cards: Downloading Software
18
The revision level of the software in an M/SDSL port card must be P6.02.00 or
above for the unit to work properly with the POTS splitter. (The P in the firmware
revision level is a mnemonic for POTS. Firmware releases not beginning with P
are not compatible with POTS.) To determine the revision level, follow this menu
selection sequence to display the Identity screen:
Main Menu
Status
If you determine you require updated software, download software from the
Paradyne World Wide Web site, then download it to your termination unit.
Procedure
To acquire the software:
1. Request access to the Paradyne World Wide Web Subscriber Download
Page from your customer support representative.
2. On the Download Page, locate and click on the download file for version
P6.02.00 or above.
3. The file is compressed. Save the file on your PC and execute it to expand it,
creating a file with the suffix .ocd. Move the file, if necessary, to a directory
accessible to your TFTP server.
Procedure
To download software from your TFTP server using the Download Code screen:
1. Follow this menu selection sequence:
Main Menu
Control
2. Position the cursor in the Image File Name field. Type the name of the .ocd
file to be downloaded.
3. Position the cursor in the TFTP Server IP Address field. Type the IP address
of your TFTP server.
4. Position the cursor in the Immediately Apply Download field. Select Yes.
5. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.
Press Enter.
6. When the data transfer is complete, the Transfer Status field changes to
Completed successfully.
Identity
Download Code
April 2000
5020-A2-GN10-60
Advertisement
Table of Contents
