Communications And Fax Software Settings; G Guidelines For All Software - Paradyne 2001 User Manual

Communications and Fax
Software Settings
This appendix lists the recommended settings for several
communications, remote communications, and fax software
packages that have been tested with the DataPort. Refer to
your software's user's guide for the location of these
configuration parameters.
Guidelines for All Software
These overall guidelines apply when using the DataPort 2001
with the software packages listed in this appendix:
G
If your software has an Auto Baud selection, make sure
it is Off.
G
If you manually change the baud rate (the software's
reference to the speed of the connection between the
DataPort 2001 and the computer) while the DataPort
2001 is offline, enter AT and press the Enter key before
receiving a data transfer. This is known as Autobaud,
where the DataPort 2001 uses the "A" character to
gather information about the baud rate and character
structure, and ensures that the DataPort 2001 is
configured to the new speed.
G
If your software has a Lock Speed selection, make sure
it is ON.
G
Use Hardware flow control (RTS/CTS). This is the
recommended flow control method; however, some
packages require software flow control (XON/XOFF).
C