Fax; Ec Light; Appletalk Remote Access (Ara) - Paradyne 2001 User Manual

Fax

P: Your DataPort 2001 cannot send or receive a fax.
S: Make sure that your fax software is correctly installed.
S: Check your fax software to see if there is an Answer mode
or receive fax setting that must be enabled.
P: Sections of your fax are missing.
S: This often indicates a noisy telephone line or a flow control
problem. To resolve the flow control problem, try using
hardware flow control (CTS/RTS). This must be enabled in
your software (refer to the software's documentation) and
set within your DataPort 2001 using the AT\Q3 command
(RTS/CTS flow control).
P: Your fax did not complete, and your DataPort 2001
displays results codes in the numeric format.
S: For some reason, your DataPort 2001 and software are no
longer communicating, and as a result, your DataPort 2001
is stuck in fax mode. Type ATE1V1 and press Enter. The
software should respond with an OK. Try sending or
receiving the fax again.

EC Light

P: The EC light is flashing.
S: Contact technical support for product return procedures.

AppleTalk Remote Access (ARA)

P: You have installed the ARA script from the AT&T BBS,
but are having problems loading ARA.
S: Turn AppleTalk
S: Make sure that a conflicting package is not active. Refer to
your software documentation for ARA conflict information.
r
ON.