Paradyne 2001 User Manual page 87

Table B-1. AT Command and S-Register List (26 of 34)
AT
Command/ Description
S-Register
&V View Configuration Options and Phone Directory
n
&V0
&V1
&V2
&V3
&V4
&V8
&V1 n Displays a continuous scroll of the View
&W Write (Save) Changes to Memory
n
Saves configuration options in one of two user
areas. (See also Z and &Y.)
&W0 Saves current configuration options to
&W1 Saves current configuration options to
&X Transmit Clock Source
n
Determines the source of timing (for synchronous
applications only.)
&X0 Internal
&X1
&X2
Displays current configuration options in
Active memory.
Displays configuration options stored in
memory area specified by &Y command.
Displays configuration options stored in
User 0.
Displays configuration options stored in
User 1.
Displays telephone numbers stored in
directory locations 1 and 2.
Displays DataPort 2001 status information
for troubleshooting.
command. ( n = 0 for &V0, 1 for &V1, 2 for
&V2, 3 for &V3, and 4 for &V4.)
User 0.
User 1.
External
Receive Clock Loop