Table of Contents
Advertisement
Table B-1. AT Command and S-Register List (13 of 34)
AT
Command/
Description
S-Register
S65= n
Line Current Disconnect
Enables or disables line current disconnects.
Normally, loss of line current means that the
remote DataPort 2001 has disconnected. In
cases where the line current is interrupted by the
network when the line is not being disconnected,
Line Current Disconnect delay should be
lengthened, or Line Current Disconnect disabled.
S65=0
S65=1
S65=2
&F commands set this to 0.
S66= n
VoiceSpan Phone Ring Count
Sets the maximum number of rings used to alert
the user to an impending VoiceSpan session. The
signal used for this ring is audibly distinct from a
normal ring.
S66=0
S66=1
through
S66=254 254 rings
S66=255 Alert signal rings forever
%VF sets this to S66=4 (4 rings).
Disconnect after 8 milliseconds
Disconnect after 90 milliseconds
Disable
Disable
1 ring
Advertisement
Table of Contents
