Table of Contents
Advertisement
Table B-1. AT Command and S-Register List (18 of 34)
AT
Command/
Description
S-Register
S90=
DTE Rate = VF Rate
n
Automatically adjusts the computer's rate to
equal the dial-line rate.
0 = Disable
1 = Enable
NOTE:This register is not valid if Direct mode
(\N1) is used.
S91=
Cellular Enhancements
n
This is part of the ETC protocol and is enabled
when the DataPort 2001 is configured using
AT&F5 or AT&F6 commands.
0 = Disable
1 = Enable
Cellular setting is Enable.
T
Tone Dial
Specifies touch-tone dialing. This is the default
type. See D
V
Result Code Format
n
Determines the way result codes are sent to the
DTE. See Table A-2 in Appendix A.
V0
V1
V2
n.
Displays as digits (Numbers 1)
Displays as text
Displays as digits (Numbers 2)
Advertisement
Table of Contents
