MicroPhone II Ver. 4.1 and
MicroPhone Pro Ver. 1.0 (Macintosh)
Set the following parameters for this communications package:
G
Use the Standard modem driver
G
Set the Baud Rate to the highest speed compatible with
your computer
G
Select Hardware flow control
G
Issue AT&F%VF&W after opening the software
MicroPhone II for Windows Ver. 2.01
G
Use the Standard V.32 modem driver
G
Set the Baud Rate to the highest speed compatible with
your computer
G
Select Hardware flow control
G
Select Connection Open if AT commands are not
echoed back
r
Microsoft
Windows Terminal Ver. 3.1
Set the following parameters for this communications package:
G
Select a COM port
G
Select 19200 as a baud rate
G
Select Hardware Flow Control
r
Mirror III
Ver. 2.2
Set the following parameters for this communications package:
G
Select AT&T from the list of modems. Select the
3800 Series modem driver and then V.42 bis.
G
Change \N5 to \N7 in the Modem Init: string.
G
Set Speed: to the highest speed compatible with your
PC.