Table of Contents
Advertisement
Table B-1. AT Command and S-Register List (20 of 34)
AT
Command/
Description
S-Register
Y
Long Space Disconnect
n
Determines whether the DataPort 2001
disconnects if a long space is detected.
Y0
Y1
Z
Reset and Load Active
n
Loads configuration options saved with the
&W command.
Z0
Z1
Z or Z3
&C
CD (Carrier Detect) Control
n
Determines the handling of the Carrier Detect
signal.
&C0 Forced On
&C1 Follows standard RS232 operation: CD is
&C2 Forced on, but turns off momentarily when
&C3 Follows DTR.
&C4 Simulated Control Carrier.
&C5 Follows DTR, but turns off upon
Disable
Enable
Loads configuration options in User 0 into
Active.
Loads configuration options in User 1 into
Active.
Performs a reset and loads storage area
specified by &Y into Active.
on when the remote modem's carrier is
detected.
disconnected.
disconnect.
Advertisement
Table of Contents
