Paradyne 2001 User Manual page 89

Table B-1. AT Command and S-Register List (28 of 34)
AT
Command/ Description
S-Register
\C Error Control Negotiate Buffer
n
Determines whether the DataPort 2001 buffers
data during error control negotiation.
\C0
\C1
\C2
\D CTS Control
n
Determines the handling of the Clear To Send
signal.
\D0
\D1
\D2
\D3
\G Modem-to-Modem Flow Control
n
Controls whether modem-to-modem flow control
is used for Buffer Mode connections. (See \N.)
\G0
\G1
Disable
Enable
Disable but enable upon fallback.
Forced ON.
Follows standard RS-232 operation: CTS
follows DTS.
Forced on, but turns off momentarily when
disconnected.
Follows state of DTR signal.
Disable
Enable