Paradyne 2001 User Manual page 68

Table B-1. AT Command and S-Register List (7 of 34)
AT
Command/ Description
S-Register
S0= Auto-Answer Ring Number
n
0 = Disable
Number of rings before the DataPort 2001
answers. Accepts a ring count from 0 to 255.
Factory setting is
answered manually, or by issuing the
A command.
S2= AT Escape Character
n
Sets the AT Escape Character to a value
from 0 to 127. Factory setting is 43, an ASCII
+ character.
S3= Carriage Return Character
n
Sets the Carriage Return Character to a value
from 0 to 127. Factory setting is 13, an ASCII
carriage return.
S4= Line Feed Character
n
Sets the Line Feed Character to a value from 0 to
127. Factory setting is 10, an ASCII line feed
character.
S5= Backspace Character
n
Sets the Backspace Character to a value from 0
to 127. Factory setting is 08, an ASCII backspace
character.
S6= Blind Dial Pause Time
n
Sets the amount of time the DataPort 2001 waits
before dialing when Dial Tone Detect is disabled
(see X command). Accepts a pause time from 2
to 255 seconds. Factory setting is 2 seconds.
If set to 0, a call must be
1.