Paradyne COMSPHERE 6700 Series User Manual page 79

Table C-1. NMS 6700 Device MIB Objects (16 of 17)
Object
devExtLeadsInputA
(devExtLeads 3)
devExtLeadsInputB
(devExtLeads 4)
devCommandDial
(devCommand 1)
devCommandDisconnect
(devCommand 2)
devCommandBusy
(devCommand 3)
devCommandSwitchTo
(devCommand 4)
6700-A2-GB20-30
Description
For 3500/3600 Series devices,
Input A port is connected to
RS-232 input pin 19 of port 1.
For 3800/3900 Series devices,
Input A port is connected to
standalone models only on
RS-232 input pin 19 of port 1.
For 3500/3600 Series devices,
Input B port is connected to
RS-232 input pin 23 of port 1.
For 3800/3900 Series devices,
Input B port is connected to
standalone models only on
RS-232 input pin 14 of port 1.
Setting this attribute will cause
the modem to dial the entered
number. To dial a stored
number, the string must begin
with d and be followed by the
call directory entry number.
This object will always return a
value of unknown(3).
This object will always return a
value of unknown(3). To test the
current busy state, refer to the
devStatusAlert object.
Switch service mode to
dial-backup(1), dial-standby(2),
leased(3), or service-line(4).
This object always returns a
value of unknown(5).
September 1998
NMS Device MIB Specifications
Setting/Contents
lead-off(1)
lead-on(2)
Supported as read-only.
lead-off(1)
lead-on(2)
Supported as read-only.
This variable will always return a
zero-length string.
Supported as read/write.
disconnect-call(1) – Causes the
current call to be disconnected.
disconnect-service(2) – Causes
service disconnect.
unknown(3)
Supported as read/write.
set-busy(1) – Causes the device to
busy out the attached analog phone
line.
clear-busy(2) – Causes the device to
unbusy the analog phone line.
unknown(3)
Supported as read/write.
dial-backup(1)
dial-standby(2)
leased(3)
service-line(4) – Switch for
management mode.
unknown(5)
Supported as read/write.
C-17