Paradyne COMSPHERE 6700 Series User Manual page 74

NMS Device MIB Specifications
Table C-1. NMS 6700 Device MIB Objects (11 of 17)
Object
devCirQualPhaseHitsValidity
(devCirQual 31)
devCirQualPhaseHits
(devCirQual 32)
devCirQualImpulseNoiseValidity
(devCirQual 33)
devCirQualImpulseNoise
(devCirQual 34)
devCirQualQualDropoutsValidity
(devCirQual 35)
C-12
Description
Validity of the object
devCirQualPhaseHits.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality phase hits.
Validity of the object
devCirQualImpulseNoise.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality impulse noise.
Validity of the object
devCirQualQualDropouts.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
September 1998
Setting/Contents
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Integer value represents the number of
phase hit events during the last 15
minutes. Possible range is 0 to 4095.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Integer value represents the number of
impulse noise events during the last
15 minutes. Possible range is 0 to 4095.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
6700-A2-GB20-30