Paradyne COMSPHERE 6700 Series User Manual page 56

Network management system snmp proxy agent feature
Hide thumbs Also See for COMSPHERE 6700 Series:
Table of Contents

Advertisement

NMS 6700 MIB Specifications
Table B-1. NMS 6700 MIB Objects (12 of 16)
Object
nmsReportType
(nmsReportEntry 3)
nmsReportName
(nmsReportEntry 4)
nmsReportScope
(nmsReportEntry 5)
nmsReportStart
(nmsReportEntry 6)
nmsReportStop
(nmsReportEntry 7)
nmsReportStatus
(nmsReportEntry 8)
nmsReportErrorDesc
(nmsReportEntry 9)
B-18
Description
The report type is selected via this
object. Default value of noOp(1)
produces no report.
File Formats
Refer to
in Chapter 3,
Traps and Reports.
This is the file name for the report file
that will be generated. The file name
must be legal for the operating
system hosting the 6700 NMS and
the file name may not contain path
information. The directory to place
reports in must be valid and already
configured.
Specifies the scope of the report file
request. If a device name is used,
the report is limited to the single
device. If a hunt group name is used,
the report covers all devices in the
hunt group. If null is used, all
configured devices are reported.
Specifies the report start date and
time in RFC 1514 DateAndTime
format.
Specifies the report stop date and
time in RFC 1514 DateAndTime
format.
The status of the report.
Error message from report request,
or null string if no error.
September 1998
Setting/Contents
noOp(1) – Default.
callStatistics(2)
callFault(3)
deviceList(4)
alarmHistory(5)
All reports are written to the
SNMP\REPORT subdirectory in the
6700 install directory and can be
modified in the PCNMS.INI file. The
installation default is
C:\PCNMS\SNMP\REPORT.
Refer to Chapter 4, Configuration , in
the User's Guide for device name and
hunt group entry configuration details.
Supported as read/write.
Supported as read/write.
idle(1) – Default.
busy(2) – Changed to busy when a
report operation is started.
reportDone(3) – Successful report
completion.
reportFail(4) – Report failure.
Refer to next object.
Supported as read-only.
If receive reportFail(4) in previous
object, cause of failure explained
here.
Supported as read-only.
6700-A2-GB20-30

Advertisement

Table of Contents
loading

Table of Contents