Paradyne COMSPHERE 6700 Series User Manual page 53

Table B-1. NMS 6700 MIB Objects (9 of 16)
Object
nmsTestRemoteErrorBlocks
(nmsTestEntry 23)
nmsTestTimeOutsValidity
(nmsTestEntry 24)
nmsTestTimeOuts
(nmsTestEntry 25)
nmsTestOwner
(nmsTestEntry 26)
nmsTestEntryStatus
(nmsTestEntry 27)
nmsTestNotify
(nmsTestEntry 28)
nmsTestErrorDesc
(nmsTestEntry 29)
nmsTransactionEntries
(nmsTransaction 1)
6700-A2-GB20-30
Description
Remote Error Bits. Not used for the
3800 and 3900 Series devices.
Validity of the test result object
nmsTestTimeOuts.
Time-outs. Not used for the 3800 and
3900 Series devices.
The NMS Manager that configured
this entry and is therefore using the
resources assigned to it. It is
suggested that this string contain
one or more of the following:
IP address
Management station name
Network manager's name
Network manager's location
Network manager's phone
number
Action Request Setup Rules
Refer to
on page B-2.
If enabled, a Test Completed trap is
generated when the testing has
finished.
Error message from last test, or null
string if no error.
The number of NMS Transaction
entries configured. This number is
controlled by the following lines in the
6700 profile (default value is shown).
[SNMP]
NmsTransactionEntries=8
September 1998
NMS 6700 MIB Specifications
Setting/Contents
Supported as read-only.
The validity objects are:
valid-final(1)
valid-intermediate(2)
not-available-yet(3)
count-overflow(4)
not-used(5)
Supported as read-only.
Supported as read-only.
Supported as read/write.
valid(1)
createRequest(2)
underCreation(3)
invalid(4)
Supported as read/write.
disabled(1) – Default.
enabled(2)
Supported as read/write.
Supported as read-only.
Supported as read-only.
B-15