Paradyne COMSPHERE 6700 Series User Manual page 75

Table C-1. NMS 6700 Device MIB Objects (12 of 17)
Object
devCirQualQualDropouts
(devCirQual 36)
devCirQualLineQualityValidity
(devCirQual 37)
devCirQualLineQuality
(devCirQual 38)
devCirQualNearEndEchoValidity
(devCirQual 39)
devCirQualNearEndEcho
(devCirQual 40)
6700-A2-GB20-30
Description
Circuit quality dropouts.
Validity of the object
devCirQualLineQuality.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality line (signal)
quality.
Validity of the object
devCirQualNearEndEcho.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality near end echo.
September 1998
NMS Device MIB Specifications
Setting/Contents
Integer value represents the number of
dropout events during the last 15
minutes. Possible range is 0 to 4095.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
excellent(1)
good(2)
fair(3)
poor(4)
no-signal(5)
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Units are (dB x10). Possible range is
0.0 to –102.4 dB.
Supported as read-only.
C-13