Paradyne COMSPHERE 6700 Series User Manual page 57

Table B-1. NMS 6700 MIB Objects (13 of 16)
Object
nmsReportOwner
(nmsReportEntry 10)
nmsReportOwnerIpAddr
(nmsReportEntry 11)
nmsReportNotify
(nmsReportEntry 12)
nmsAlarmTable
(nmsAlarm 1)
nmsAlarmEntry
(nmsAlarmTable 1)
NmsAlarmRecipient
(nmsAlarmEntry 1)
nmsAlarmClass
(nmsAlarmEntry 2)
nmsAlarmNumber
(nmsAlarmEntry 3)
6700-A2-GB20-30
Description
Identifies the system or person that
configured this entry and is therefore
using the resources assigned to it.
It is suggested that this string contain
one or more of the following:
IP address
Management station name
Network manager's name
Location
Phone number
The IP address of the system or
person requesting that the report be
run.
If enabled, a Report Completed trap
is generated when the transaction
has finished.
The alarm table contains a list of
actions, specific to each authorized
manager, to be taken when the
respective trap condition occurs.
An entry in the alarm table. Entries
are indexed by recipient IP Address.
alarm class, and alarm number.
This object is the IP address of a
NMS manager configured to receive
traps from the proxy agent.
The device class of the alarm
originator.
This object is the Enterprise specific
trap number of an alarm that can be
generated by the proxy agent.
September 1998
NMS 6700 MIB Specifications
Setting/Contents
Refer to Chapter 4, Configuration , in
the User's Guide for configuration
details.
Supported as read-only.
disabled(1) – Default.
enabled(2)
Supported as read/write.
—
—
Supported as read-only.
dial(1)
apl(2)
dsu(3)
nms(99)
Supported as read-only.
Mode 2 Traps
Refer to in Chapter 3,
Traps and Report Formats.
Supported as read-only.
B-19