Paradyne COMSPHERE 6700 Series User Manual page 61

Table B-2. Transaction Commands (2 of 2)
Command
|
SET {OPTION THRESHOLD}
<option> = <value> [;<modifier>]
|
UPLOAD {OPTION
THRESHOLD} <device>
|
DOWNLOAD {OPTION
THRESHOLD} <device>
|
SAVE {OPTION THRESHOLD}
<file name>
|
LOAD {OPTION THRESHOLD}
<file name>
|
GET {OPTION THRESHOLD}
<option>
|
RANGE {OPTION THRESHOLD}
<device> [<option>]
DELETE REPORT <file name>
EXIST REPORT <file name>
6700-A2-GB20-30
Action
Acts upon the scratch buffer. The scratch buffer must have been previously
loaded or uploaded.
Transfers active option/threshold settings from the device to the scratch buffer.
Transfers scratch buffer to active option/threshold settings in the device.
Saves the scratch buffer to a disk file.
Loads the scratch buffer from a disk file.
Responds with value (and modifier) for the specified option/threshold.
Numbers are represented by ASCII numerals. Multiple fields are separated by
semicolons.
Responds with option/threshold value range for the specified device based on
device type. The range response occurs in nmsTransactionResponseTable.
The type of response is indicated in nmsTransactionResponseString
| |
{OPTIONS CHOICE INTEGER
Range response format for response type OPTIONS (when option not
specified): option1, option2, etc.
Example option list for APL devices:
Async/Sync Mode
Async DTE Rate
Async Number of Bits
Async Parity Bit
Async Stop Bits
DTR Action
DSR Control
RTS Action
CTS Control, etc.
Range response format (when option is specified) for following response
types:
CHOICE: enum1, enum2, enum3, etc.
INTEGER: low, high, inc, scale
TEXT: minchrs (low), maxchrs (high)
Example choice list for option Async Parity Bit:
None, Even, Odd, Mark, Space
Delete report with specified name from the SNMP\REPORT directory.
Tests for existence of a file with specified name in the SNMP\REPORT
directory. Response in the nmsTransactionResponseString is either EXISTS or
NOT FOUND.
September 1998
NMS 6700 MIB Specifications
|
TEXT}.
B-23