Paradyne COMSPHERE 6700 Series User Manual page 76

NMS Device MIB Specifications
Table C-1. NMS 6700 Device MIB Objects (13 of 17)
Object
devCirQualFarEndEchoValidity
(devCirQual 41)
devCirQualFarEndEcho
(devCirQual 42)
devCirQualFarEndDelayValidity
(devCirQual 43)
devCirQualFarEndDelay
(devCirQual 44)
devCirQualEchoFreqOffsetValidity
(devCirQual 45)
devCirQualEchoFreqOffset
(devCirQual 46)
C-14
Description
Validity of the object
devCirQualFarEndEcho.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality far end echo.
Validity of the object
devCirQualFarEndDelay.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality far end delay.
Validity of the object
devCirQualEchoFreqOffset.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality echo frequency
offset.
September 1998
Setting/Contents
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Units are (dB x10). Possible range is
0.0 to –102.4 dB.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Units are in milliseconds. Possible
range is 0 to 4095 ms.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Units are tenths of Hertz. Possible
range is –51.1 to +51.1 Hz.
Supported as read-only.
6700-A2-GB20-30