Paradyne COMSPHERE 6700 Series User Manual page 55

Table B-1. NMS 6700 MIB Objects (11 of 16)
Object
nmsTransactionOwnerIpAddr
(nmsTransactionEntry 7)
nmsTransactionNotify
(nmsTransactionEntry 8)
nmsTransactionResponseTable
(nmsTransaction 3)
nmsTransactionResponseEntry
(nmsTransactionResponseTable 1)
nmsTransactionEntryIndex
(nmsTransactionResponseEntry 1)
nmsTransactionResponseIndex
(nmsTransactionResponseEntry 2)
nmsTransactionResponseLine
(nmsTransactionResponseEntry 3)
nmsReportExpirationDays
(nmsReport 1)
nmsReportEntries
(nmsReport 2)
nmsReportTable
(nmsReport 3)
nmsReportEntry
(nmsReportTable 1)
nmsReportIndex
(nmsReportEntry 1)
nmsReportEntryStatus
(nmsReportEntry 2)
6700-A2-GB20-30
Description
The IP address of the NMS Manager
that configured this entry.
If enabled, a Transaction Completed
is generated when the transaction
has finished.
The response table contains a list of
response lines to the RANGE
transaction command.
An entry in the transaction response
table.
This is the same index used in
nmsTransactionIndex.
Response line number, starting
with 1.
This object is a transaction command
response string from the
nmsTransactionResponseEntry
Array.
The number of days before a NMS
Report file is automatically deleted.
The number of NMS report Entries
configured. This number is controlled
by the following lines in the 6700
profile (default value is shown).
The NMS Report table uses
RMON-style arbitration (RFC 1271)
to allocate Report sessions. There
are 8 (by default) simultaneous
report slots available.
An entry in the NMS Report table.
This object is the Report table entry
index.
The status of this nmsReportTable
entry.
Refer to Action Request Setup Rules
on page B-2.
September 1998
NMS 6700 MIB Specifications
Setting/Contents
Supported as read-only.
disabled(1) – Default.
enabled(2)
Supported as read/write.
Refer to Transaction Commands
page B-23 for transaction commands
and syntax.
Entries are indexed by transaction
index and by response index.
Supported as read-only.
Supported as read-only.
Supported as read-only.
Default is 30 days. Setting the value
to zero disables the automatic file
deletion feature.
Supported as read/write.
Supported as read-only.
Each report slot allows for a single
outstanding report operation.
—
Supported as read-only.
valid(1)
createRequest(2)
underCreation(3)
invalid(4)
on
B-17