Paradyne COMSPHERE 6700 Series User Manual page 71

Table C-1. NMS 6700 Device MIB Objects (8 of 17)
Object
devCirQualPhaseJitter300Validity
(devCirQual 13)
devCirQualPhaseJitter300
(devCirQual 14)
devCirQualPositiveAttenuationValidity
(devCirQual 15)
devCirQualPositiveAttenuation
(devCirQual 16)
devCirQualNegativeAttenuationValidity
(devCirQual 17)
devCirQualNegativeAttenuation
(devCirQual 18)
6700-A2-GB20-30
Description
Validity of the object
devCirQualPhaseJitter300.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality phase jitter
20–300 Hz.
Validity of the object
devCirQualPositiveAttenuation.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality positive
attenuation.
Validity of the object
devCirQualNegativeAttenuation.
The setting not-available-yet(6)
is also used if circuit quality is
not supported by the device
type.
Circuit quality negative
attenuation.
September 1998
NMS Device MIB Specifications
Setting/Contents
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Units are (degrees x 10). Possible range
is 0.0 to 33 degrees.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Supported as read-only.
valid(1)
valid-greater-than(2)
valid-less-than(3)
not-valid-for-modulation-mode(4)
not-valid-for-multipoint-mode(5)
not-available-yet(6)
count-overflow(7)
not-used(8)
Supported as read-only.
Supported as read-only.
C-9