Ricoh Pro C7500 Operator's Manual page 114

2. Paper Specifications and Adding Paper
*3 The auto detect function does not work when the LCT banner sheet tray or extension LCT banner sheet tray is
attached.
*4 Specify the paper size in the paper settings when the LCT banner sheet tray or extension LCT banner sheet
tray is attached.
*5 You cannot specify the paper size when the LCT banner sheet tray or extension LCT banner sheet tray is
attached.
*6 You can feed paper that is 210–330.2 mm (8.3–13.0 inches) long and 420.0–700 mm (16.6–27.6
inches) wide when the LCT banner sheet tray is attached. You can feed paper that is 210–330.2 mm (8.3–
13.0 inches) long and 420.0–960 mm (16.6–37.8 inches) wide when the extension LCT banner sheet tray
is attached.
*7 You cannot specify paper type when the LCT banner sheet tray or extension LCT banner sheet tray is
attached.
*8 You can load up to 800 sheets of paper that is 420.0–700 mm (16.6–27.6 inches) long when the LCT
banner sheet tray is attached. You can feed up to 500 sheets of paper that is 420.0–960 mm (16.6–37.8
inches) long when the extension LCT banner sheet tray is attached (on paper 0.1 mm (0.004 inches) thick).
*9 Do not stack paper over the limit mark. The maximum number of sheets you can set at once depends on the
paper's thickness and condition.
*10 The tab fence is required.
*11 Open the flaps, and load the envelopes with their flaps pointed toward the right side of the paper tray.
*12 It is necessary to specify the sizes of the envelopes including their flap sizes using [Custom Size] in [Tray
Paper Settings].
*13 The envelope sizes on the table do not include their flaps.
*14 Flatten curls so that they fit within the following guidelines.
Black color paper: Curl height 5 mm (0.2 inches) or below, R over 100 mm (3.94 inches).
Other papers: Curl height 10 mm (0. 4 inches) or below, R over 100 mm (3.94 inches).
*15 Flatten the curl on the envelope, then set the difference of the stack height of the bottom of the envelope and
the stack height of the flap portion to be 10 mm (0.4 inches) or below.
*16 Attach the small tab end fence when loading carbonless paper of paper weight 2 or less.
*17 Avoid use in high temperature and humidity.
*18 You can load the brand specified by the manufacturer only. Also, align the grain direction of the paper with
the feed direction when loading the paper on the tray.
*19 The paper brand of usable paper of 400g/m
local dealer.
*20 When loading paper with punch holes, set the paper in the direction so that the punch holes are on the
trailing edge of the paper.
*21 You can feed paper of 52.3–400 g/m
(19.2–27.6 inches) while using Extension LCT banner sheet tray. You can feed paper of 63.1–310.0 g/m
(17–82 lb. Bond) when you specify paper of 700.1 mm (27.6 inches) or longer.
*22 Grain short paper of Paper Weight 2 cannot be used when paper that is 700.1–960.0 mm (27.6–37.8
inches) long is specified.
112
2
(106 lb. Bond) or more is specified. For details, contact your
2
(14–106 lb. Bond) when you specify paper of 487.8–700 mm
2