When The Animation Does Not Appear - Ricoh Pro C7500 Operator's Manual

6. Troubleshooting
2. Firmly insert the knob into the slot on the fusing unit aligning its tip to the direction of the slot.
3. Turn the knob counterclockwise until the paper is ejected to the right side of the fusing unit to
remove the jammed paper.
4. Store the knob in its original location.

When the Animation Does Not Appear

If a paper jam has occurred in certain locations, the procedure for removing the jammed paper is not
displayed on the control panel. Open the front cover in the place corresponding to the letter displayed
(on the control panel), and then proceed as instructed on the sticker or sheet inside the front cover, or in
258
M0EBIM2352
M0EBIM2353
M0EBIM2354