Ricoh Pro C7500 Operator's Manual page 143

How to Register Paper Scanned by the Media Identification Unit as Custom Paper
Registering a new custom paper with the Media Identification Unit
1. Press the [Media] hub
2. Specify "Paper Size", and then press [OK].
3. Press [Media Identification Unit].
4. Specify "Custom Paper Name", "Paper Type", "Paper Color", "Prepunched".
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
6. Press [OK]
The information scanned from the paper is applied, and registered as a "Custom Paper".
Modifying the registered custom paper settings using the Media Identification Unit
• You cannot change the settings of the paper that is already registered on a tray. Assign
another paper to the tray on which the paper is assigned. For details, see page 154
"Changing Tray Paper Settings".
• The settings of the paper that is being edited on the color controller cannot be changed.
[Add].
M0EBPM7242
D0CPIC2353
[OK].
Registering a Custom Paper
141