1234 [Print Mode When Switching Paper Type]; 1235 [Fusing Temperature Range] - Ricoh PRO C7200 Operating Instructions Manual

4. Details of Menu Items in Advanced Settings
[FCS/S]
Under the following conditions, adjust pressure roller temperature.
Full Color Printing including Special Color
High Quality is applied in DFE Setting
Setting Item
02: Press Rlr Temp: Clr/Sp/03: Press Rlr
Temp: White

1234 [Print Mode When Switching Paper Type]

Adjust the waiting time when switching the paper in a job with mixed paper. [Productivity Priority] raises
the productivity, however the fusing quality may be reduced.
01: Setting

1235 [Fusing Temperature Range]

[BW/FC/FCS]
Under conditions below, set range of fusing start temperature.
B&W/FC/FC with S
HQ is not applied in DFE
The lager value becomes, the earlier print starts. However, fusing quality may become lower.
Setting Item
01: Level: BW/FC/FCS
[FCS]
Under conditions below, set range of fusing start temperature.
114
Setting Item
Max. Value Min. Value
200 50
[Use Operator Adjustment Settings]
[Fusing Priority]
[Standard]
[Productivity Priority]
Max. Value Min. Value
16 1
Step Unit
1 deg
Values
Step Unit
1 None