Setting Item
03: Setting
Tray Elevation Assist
Set the timing at which tray elevation assist starts.
Setting Item
04: Assist Mode
Specify the thickness of paper (measured value) when you specify [Always Assist On] or [Assist On
When Remaining Paper Low] in [Assist Mode].
An initial value is specified by default when you are not entering the value that you measured on paper
in [Paper Thickness]. Do not change the default value in the case.
Setting Item
05: Paper Thickness
Specify the ascending speed of the tray when you specify [Always Assist On] or [Assist On When
Remaining Paper Low] in [Assist Mode].
Setting Item
06: Speed
1312: Main/Bypass
Set the operation of the paper feed roller of Main Tray and Bypass Tray. If [On] is set, contact time of
the roller is extended according to the paper type and paper weight.
Off
On
Off
Assist On When Remaining Paper Low
Always Assist On
Max. Value
Min. Value
2,000
20
Slowest
Slower
Standard
Faster
Fastest
13: Machine: Paper Feed/Output
Values
Values
Step
Unit
10
m
Values
191