Barco iQ PRO G 500 Owner's Manual page 77

Image 7-32
Image 7-33
if one uses a gray scale pattern, the bright spots should appear in the white bar.
Selecting Preset restores the factory input balance setting
Remark on the input balance of a component video source
Before starting the Input Balance procedure, generate a signal with dominant white parts.
Input balance is also available for a component video source under following conditions:
• A component video signal is present on the BNC's
• "Data on BNC's" is selected in the Source selection menu
• Cr/Y/Cb is selected in the Advanced menu of the corresponding image file
The procedure is the same as for a data source except:
R5976491 IQ PRO G 350/500 19/09/2006
7. Image Menu
71