Barco iQ PRO G 500 Owner's Manual page 36

4. Getting started
Image 4-1
Local keypad layout
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remote control is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and settings.
Other functions of the remote control are :
• switching between stand by and operational mode.
• switching to "pause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
Diagnose LED's
LED1
LED2
LED3
30
Green
cool down sequence: flickers 60 seconds (120
seconds in case of iQ 400 series) after switching
to standby
only for the Pro version : shows when projector is in
standby and server is active.
IR acknowledgement
Red
rescue program (software error)
hardware error
continue : standby
flickers : Security = ON
R5976491 IQ PRO G 350/500 19/09/2006