Barco iQ PRO G 500 Owner's Manual page 136

14. IQ Network
Image 14-8
Depending on the installed network (use of DHCP server or not), the IP address may be needed to be entered
or not.
For a point to point installation the projector's IP address must be entered manually.
Check the operating system on the for the IP address, or contact your IT administrator.
How to add a projector group to the projector group list ?
1. Click on the white arrow
A menu is displayed, image 14-9
2. Click on the + sign of the projector group list
A dialog box is displayed (image 14-11)
3. Fill in the group name
4. Click OK to confirm or Cancel
The group is now added to the list of groups
130
Image 14-10
Image 14-9
projector list: contains a
projector and a projector group
sub list
R5976491 IQ PRO G 350/500 19/09/2006