Configuring The Server Software - Barco iQ PRO G 500 Owner's Manual

14. IQ Network
Image 14-14

14.4.5 Configuring the Server software

Internal network connection
The internal connection ( firmware connection) between the projector controller and the single board computer uses fixed IP ad-
dresses.
The IP address of the SBC can be found in control panel
• SBC: IP address = 192.168.42.51, subnet mask = 255.255.255.248
Projector Controller's IP address = 192.168.42.50
Image 14-15
132 R5976491 IQ PRO G 350/500 19/09/2006