Connections - Barco iQ PRO G 500 Owner's Manual

14. IQ Network

14.4.1 Connections

Front plate (Layer 3) layout
D
MIC IN LINE IN OUT
Image 14-2
iQ Pro front plate (network layer)
A audio connections : mic input, line input, output
B 4 x USB connection
C RJ45 connector for network connection
D PCMCIA slot
How to connect the Single Board Computer ?
1. Use the RJ45 connector to connect the SBC to the installed network
2. Use the USB ports to connect peripherals such as mouse, keyboard,... (image 14-3)
Note: Keyboard access during pre-operating system boot (to access BIOS or F8 key to get operating system select menu) is
only supported on the bottom USB input connector next to the Ethernet connector
3. Use the PCMCIA slot to connect a Wireless LAN card or other optional inputs like Bluetooth, Modem cards,...
The slot is protected from dust by a slot door, open the slot door to insert a card.
Note: recommended card type:
-The card should be a type II card.
-The card should be Windows
4. Use the Audio connectors to connect an audio source or microphone, the output allows to use an external audio peripheral such
as an amplifier etc.
Image 14-3
126
PC CARD
10/100 Base-T
USB
A B
TM XP compatible
C
R5976491 IQ PRO G 350/500 19/09/2006