DFI CMS632 User Manual page 48

Chipset PCH-IO Configuration
X X
SATA And RST Configuration
Aptio Setup - AMI
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Speed [Auto]
SATA Mode Selection [AHCI]
M.2-M1(R1) Empty
Port 1 [Enabled]
Hot Plug [Disabled]
SATA0(R2) Empty
Port 2 [Enabled]
Hot Plug [Disabled]
SATA1(R3) Empty
Port 3 [Enabled]
Hot Plug [Disabled]
SATA2(R4) Empty
Port 4 [Enabled]
Hot Plug [Disabled]
SATA3(R5) Empty
Port 5 [Enabled]
Hot Plug [Disabled]
Version 2.22.1282. Copyright (C) 2022 AMI
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
Intel RST Premium With Intel Optane System Acceleration This option allows you to create
RAID or Intel Rapid Storage configuration along with Intel
tion on Serial ATA devices.
Use RST Legacy OROM
This field shows up when SATA Mode Selection is set to Intel RST Premium With Intel Optane
System Acceleration. Enable or disable to use RST Legacy OROM when CSM is enabled.
Ports and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
User's Manual | CMS632-W480E/Q470E
X
HD Audio Configuration
E n a b l e o r d i s a b l e S ATA
HD Audio Subsystem Configuration Settings
Device.
HD Audio
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
HD Audio
Control the detection of the HD Audio device.
Optane system accelera-
™
®
Chipset PCH-IO Configuration
X
Aptio Setup - AMI
Chipset
[Enabled]
Version 2.22.1282. Copyright (C) 2022 AMI
Disabled HDA will be unconditionally disabled.
Enabled HDA will be unconditionally enabled.
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
Control Detection of the
HD-Audio device.
Disabled = HDA will be un-
conditionally disabled
Enabled = HDA will be un-
conditionally enabled.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
48 48 48