DFI CMS632 User Manual page 34

Advanced
X
RC ACPI Configuration
Aptio Setup - AMI
Advanced
RC ACPI Configuration
Wake system from S5 [Enabled]
Wake up hour 0
Wake up minute 0
Wake up second 0
State After G3 [S0 State]
Version 2.22.1282. Copyright (C) 2022 AMI
Wake system from S5
When Enabled, the system will automatically power up at a designated time every day. Once
it's switched to [Enabled], please set up the time of day — hour, minute, and second — for
the system to wake up.
State After G3
Select between S0 State, and S5 State. This field is used to specify what state the system is
set to return to when power is re-applied after a power failure (G3 state).
S0 State The system automatically powers on after power failure.
S5 State The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
Last State The system returns to the last state right before power failure.
User's Manual | CMS632-W480E/Q470E
Advanced
X
CPU Configuration
CPU Configuration
Enable or disable System
wake on alarm event. When
Intel (VMX) Virtualization
enabled, System will wake
Technology
on the hr::min::sec speci-
Active Processor Cores
fied
Hyper-Threading
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Intel (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabilities pro-
vided by Vanderpool Technology.
Active Processor Cores
Select number of cores to enable in each processor package.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading technol-
ogy. Select disabled for other OSes not optimized for Hyper-Threading technology. When dis-
abled, only one thread per enabled core is enabled.
Aptio Setup - AMI
Advanced
[Enable]
[All]
[Enable]
Version 2.22.1282. Copyright (C) 2022 AMI
Note:
Some of the fields may not be available when the features are not supported by
the equipped CPU.
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
When enabled, a VMM can
utilize the additional hard-
ware capabilities provided
by Vanderpool Technology.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
34 34 34