DFI CMS632 User Manual page 44

Advanced
X
Network Stack Configuration
Aptio Setup - AMI
Advanced
Network Stack [Enabled]
Ipv4 PXE Support [Disabled]
Ipv6 PXE Support [Disabled]
PXE boot wait time 0
Media detect count 1
Version 2.22.1282. Copyright (C) 2022 AMI
Network Stack
Enable or disable UEFI network stack. The following fields will appear when this field is en-
abled.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be avail-
able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be avail-
able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric
keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric keys
to set the value.
User's Manual | CMS632-W480E/Q470E
Advanced
X
USB Power Control
Enable/Disable UEFI Net-
USB2_1/2 USB3_1/2
work Stack
USB2_3/4 USB3_3/4
USB2_5/6 USB3_5/6
USB2_7/8/9/10
USB2_11/12/14
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
USB Power Switch
Switch USB Power between 5V_Dual and 5V.
Aptio Setup - AMI
Advanced
[5V_Dual]
[5V_Dual]
[5V_Dual]
[5V_Dual]
[5V_Dual]
Version 2.22.1282. Copyright (C) 2022 AMI
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
Switch USB Power between
5V_Dual and 5V.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
44 44 44