DFI CMS632 User Manual page 46

Chipset
X
PEG Port Configuration
Aptio Setup - AMI
Chipset
PEG Port Configuration
PEG 0:1:0 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
PEG 0:1:1 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
► PEG Port Feature Configuration
Version 2.22.1282. Copyright (C) 2022 AMI
Enable Root Port
Enable or disable the root port, or select "Auto" for auto-detection.
Max Link Speed
Configure PCIE2/PCIE4 port's Max Speed: Auto, Gen1, Gen2 or Gen3.
User's Manual | CMS632-W480E/Q470E
► PEG Port Feature Configuration
Enable or Disable the Root
PEG Port Feature Configuration
Port
Detect Non-Compliance Device
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Detect Non-Compliance Device
Enable or disable this field to detect non-compliance PCIe devices in the PEG.
Aptio Setup - AMI
Chipset
[Enabled]
Version 2.22.1282. Copyright (C) 2022 AMI
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
Detect Non-Compliance PCI
Express Device in PEG
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
46 46 46