Zhone Hotwire 7995 Installation Instructions Manual page 24

Table 11: SNMP Traps Options (2 of 2)
General Traps
Possible Settings: Disable, Warm, AuthFail, Both
Default Setting: Both
Determines which SNMP traps are sent to each trap manager.
Enterprise Specific Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if SNMP traps are generated for enterprise-specific events.
Link Traps
Possible Settings: Disable, Up, Down, Both
Default Setting: Both
Determines if SNMP traps are generated for link up and link down for one of the
communication interfaces.
Link Traps Interfaces
Possible Settings:
7995: Network, SYNC, All
7996: Network, G.703, All
Default Setting: All
Determines if the SNMP linkUp, linkDown, and interface-related enterpriseSpecific traps are
generated for the network interface, synchronous or G.703 port, or both.
24
Hotwire TDM SHDSL Endpoints 7990-A2-ZN10-30