Table of Contents
Advertisement
Table 10:
SNMP NMS Security Options
NMS IP Validation
Possible Settings: Enable, Disable
Default Setting: Disable
For IP Complex systems, specifies whether security checking is performed on the IP address
of SNMP management systems attempting to access the node.
NMS n IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
For IP Complex systems, specifies the Internet Protocol address used to identify each SNMP
trap manager (limit of 10).
Access Type
Possible Settings: Read, Read/Write
Default Setting: Read
For IP Complex systems, determines the access level allowed for an authorized NMS when IP
address validation is being performed.
Table 11:
SNMP Traps Options (1 of 2)
SNMP Traps
Possible Settings: Enable, Disable
Default Setting: Enable
Controls the generation of SNMP trap messages.
NMS n IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
For IP Complex systems, specifies the Internet Protocol address used to identify each SNMP
trap manager (limit of 5).
NMS n Destination
Possible Settings: DSL, COM
Default Setting: DSL
For IP Complex systems, provides the network destination path of each trap manager. COM
displays if Port Use is set to NetLink.
7990-A2-ZN10-30
Hotwire TDM SHDSL Endpoints
23
Advertisement
Table of Contents
