KTI Networks KGS-0865 Installation Manual page 30

Enable 802.3az EEE mode
___________________________________________________________________________________________________________________________________________________
Port Configuration
___________________________________________________________________________________________________________________________________________________
Port
Link
Mode
Flow Control
Relay Alarm
_______________________________________________________________________________________________________________________________________ ____________
[Apply]
[Refresh]
__________________________________________________________________________________________________________________________________________________ _
v - set to enable the function
Function
TP - Twisted-Pair copper port (also specified Port #1 in other pages)
FX - Fiber port (also specified Port #2 in other pages)
Port link status
Speed and duplex status with green background - port is link on
Down with red background - port is link down
Select port operating mode
Disabled - disable the port operation
TP Mode Auto-negotiation Speed capability
Auto Enable
Forced 10 Half Disable
Forced 10 Full Disable
Forced 100 Half Disable
Forced 100 Full Disable
1000 Full Enable
Set port flow control function
v
- set to enable 802.3x pause flow control for ingress and egress
Set port link down alarm
v - set to enable port link down monitoring for failure relay output
Click to apply the configuration change
Click to refresh current configuration
10, 100, 1000M
10M
10M
100M
100M
1000M
-30-
Duplex
Full, Half
Half
Full
Half
Full
Full