Table of Contents
Advertisement
Active Subnet Mask
Active Gateway
DHCP Server
Lease Time Left
DHCP Enabled
Fallback IP Address
Fallback Subnet Mask
Fallback Gateway
Management VLAN
Name *1
Password
Inactivity Timeout
SNMP enabled
SNMP Trap destination The IP address of the SNMP trap manager
SNMP Read community SNMP community allowed for the SNMP [get] message
SNMP Write community SNMP community allowed for the SNMP [set] message
SNMP Trap community SNMP community used for the SNMP trap messages sent by the switch
[Apply]
[Refresh]
Note:
1. It is suggested to give each switch unit a system name as an alternative unique identification beside IP
address.
2. Setting change of DHCP mode takes effective immediately.
Current subnet mask for IP address for the switch management
Current gateway IP address for the switch management
Current IP address of the DHCP server
The time left for the lease IP address currently used
Use DHCP to get dynamic IP address configuration for the switch
IP address used when DHCP mode is disabled
Subnet mask for IP address used when DHCP mode is not enabled
Default gateway IP address used when DHCP mode is not enabled
Set management VLAN ID
Set the system name for this switch unit
Set new password
No user interaction timeout for web disconnection (Auto logout). Options:
0 - no timeout
60 ~ 10000 seconds
Enable SNMP agent
Click to apply the configuration change
Click to refresh current configuration
-27-
Advertisement
Table of Contents
