Table of Contents
Advertisement
3.3 Configuring IP Address and Password for the Device
The device unit was shipped with the following factory default settings for software management:
Default
IP address of the device: 192.168.0.2 / 255.255.255.0
The IP Address is an identification of the device unit in a TCP/IP network. Each unit should be designated a
new and unique IP address in the network. Refer to Web management interface for System Configuration.
The managed device is shipped with factory default password 123 for software management. The password is
used for authentication in accessing to the device via web-based interface. For security reason, it is
recommended to change the default settings for the device unit before deploying it to your network. Refer to
Web management interface for System Configuration.
-21-
Advertisement
Table of Contents
