Table of Contents
Advertisement
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and
that vents are unobstructed to prevent po-
tentially dangerous concentrations of ozone
and the build-up of heat inside your projec-
tor. Allow at least 8 inches (20cm) of space
between your projector and a wall. Allow at
least 20 inches (50 cm) of space between
the ventilation outlet and object.
2. Prevent foreign objects such as paper clips
and bits of paper from falling into your pro-
jector. Do not attempt to retrieve any ob-
jects that might fall into your projector. Do
not insert any metal objects such as a wire
or screwdriver into your projector. If some-
thing should fall into your projector, discon-
nect it immediately and have the object re-
moved by a qualified service person.
3. Do not place any liquids on top of your pro-
jector. Refer servicing to qualified service
personnel if liquid has been spilled.
4. Keep any items such as magnifying glass
out of the light path of the projector. The
light being projected from the lens is exten-
sive, therefore any kind of abnormal objects
that can redirect light coming out of the lens,
can cause unpredictable outcome such as
fire or injury to the eyes.
5. Do not cover the lens with the supplied lens
cap or equivalent while the projector is on.
Doing so can lead to melting of the cap and
possibly burning your hands due to the heat
emitted from the light output.
CAUTION: High Pressure Lamp May Explode
if Improperly Handled. Refer Servicing to Quali-
fied Service Personnel.
E-iii
Lamp Caution: Please read before
operation
Due to the lamp being sealed in a pressurized
environment, there is a small risk of explosion,
if not operated correctly. There is minimal risk
involved, if the unit is in proper working order,
but if damaged or operated beyond the recom-
mended 750 hours, the risk of explosion in-
creases.
Please note that there is a warning system built
in, that displays following message when you
reach 750 hours (shortest life) of operation
"Lamp Warning". When you see this message
please contact your dealer for a replacement. If
the lamp does explode, smoke will be dis-
charged from the vents located on the back of
the unit. This smoke is comprised of glass in
particulate form and Xenon gas, and will not
cause harm if kept out of your eyes. If your eyes
have been exposed to this gas, please flush your
eyes out with water immediately and seek im-
mediate medical attention. Do not rub your eyes!
This could cause serious injury.
WARNING: Do not look into the lens while the
projector is on. Serious damage to your eyes
could result.
CAUTION
Do not unplug the power cable from the wall
outlet under any one of the following circum-
stances. Doing so can cause damage to the
projector:
•
Immediately after the cooling fan(s) stops
working (After the projector is turned off with
the POWER OFF button the cooling fan(s)
continues to work for 3 minutes while the
POWER indicator is blinking Orange).
Advertisement
Table of Contents
