Appendix; Error Code List - Digital Projection International iS10 User Manual

6. Appendix

Error code list

Please inquire your dealer/distributor about action to be taken for each error code.
Description is omitted for error codes 20 and on.
Error code Error message
1 Cover Open
2 Lamp Temp.
3 Fan Stop
4 Power Supply
5 Lamp Off
6 LampTime Warn
7 LampTime Over
8 Lamp PS Temp.
9 Set Temp.
10 DLP PS
11 DLP Comm
12 Lamp Timer
20 System Fail
21 Self Test Fail
22 ARM Fail
23 DSP Fail
24 Interface FPGA Fail
25 Processor FPGA Fail
30 IB Diag Not Performed
31 IB FPGA Code Invalid
32 IB FPGA INITZ Fail
33 IB FPGA No-Load Set
34 IB FPGA DONE Fail
35 IB FPGA Reg R/W Fail
36 IB Framestore Test Fail
37 IB ANC FIFO Test Fail
38 IB RTC Serial # Fail
39 IB UART0 Fail
40 IB UART1 Fail
41 IB IIC Fail
42 IB Ethernet Fail
34 Appendix
description
Cover is open.
Temperature (lamp temperature) is abnormal.
Fan has stopped.
Power supply is abnormal.
Lamp does not light up.
Lamp time is over. (Warning)
Lamp time is over. (Power off)
Temperature (lamp power inside temperature) is abnormal.
Temperature (set inside temperature) is abnormal.
Engine power is abnormal.
TI-Engine communication error is detected.
Lamp Timer error is detected.