Table of Contents
Advertisement
5. Maintenance of Your Projector
CAUTION
•
Please request your dealer to perform lamp replacement, filter replacement and cleaning of the projector
inside.
5-1. Cleaning the cabinet
Be sure to disconnect the power plug from the outlet before carrying out maintenance of your
projector.
• Wipe with dry soft cloth without nap.
When the cabinet is excessively dirty, wipe with cloth well wrung after being wetted with a
neutral detergent diluted with water and then finish up with dry cloth.
When you use a chemical dustcloth, follow the instructions in the manual attached to it.
• Do not use a solvent, such as thinner or benzine. The coating may deteriorate or peel off.
• When removing dust on the ventilation opening, suck it off using an adapter with a brush on a
vacuum cleaner. Never allow the cleaner without an adapter to come in direct contact or use a
nozzle adapter in cleaning.
• Clean the ventilation opening at regular intervals. Dust, if allowed to accumulate there, may
cause heating inside, which leads to functional trouble. The interval, which can vary with the
location of your projector, is about 100 hours.
• Do not damage the cabinet by scratching it or allowing hard objects to hit it.
• Please consult your dealer/distributor about the cleaning of the projector inside.
NOTE
•
Do not allow insecticide or other volatile liquid to splash on the cabinet, lens or screen.
Also, do not allow any rubber or vinyl object to remain in contact with the cabinet for a long time. The coating
may deteriorate or peel off.
32
Maintenance of Your Projector
Advertisement
Table of Contents
