Table of Contents
Advertisement
2. Installation and Connection
2-1. Steps of setting up and connecting
Use the following steps for setting up your projector:
Step 1
Set up the screen and projector. (Contact your dealer to carry out the setup.)
Step 2
Connect cables to the image input terminals. (See this page)
Connect cables to the various control terminals. (See page 15)
Step 3
Connect the power cord. (See page 16)
2-2. Connecting the image input terminals
Your projector has three image input terminals, namely, the HDSDI A input terminal, the HDSDI B
input terminal and the DVI-D input terminal.
•
HDSDI A/B input terminal (SDI-A/SDI-B) ........Inputs serial digital images from a Video Server
•
DVI-D input terminal (DVI) ................................Inputs digital RGB signals from a PC.
DVI-D
signal cable
14
Installation and Connection
or Video source.
HDSDI signal cable
Advertisement
Table of Contents
