Table of Contents
Advertisement
4-3. Source Select
Select the title of the signal to be projected by using Source Select.
Up to four titles can be saved. (See page 19)
4-4. Setup
Projector Setup
Lamp setup
The brightness of the lamp is adjusted in eight levels.
• Adjust ................ Select from among 12%/25%/37%/50%/62%/75%/87%/100
• Auto ................... Adjustment is made automatically.
Lamp Auto
The initial setting for auto adjustment of lamp brightness is made.
• User Adjust ........ Set a level between 0 and 100%.
• Test .................... Perform a forced check of Lamp Auto setting.
Image Orient
Make a selection according to the setup position of your projector and screen.
WARNING
Please request your dealer/distributor to set up your projector.
Never carry out the setup by yourself.
A fall or other accidents may occur to cause injury.
• Desktop Front
The projector is installed in a normal position, and projection is made from front of the screen.
Adjustment Menus
27
Advertisement
Table of Contents
