Table of Contents
Advertisement
14. AMPLITUDE button
Press the AMPLITUDE (G) button while depressing the CTL button, then the green (G signal) of
the test pattern will be turned off temporarily. Press this button again while depressing the CTL
button, and the green (G signal) will be projected again.
15. ENTRYLIST button
Press the ENTRYLIST (B) button while depressing the CTL button, then the blue (B signal) of the
test pattern will be turned off temporarily. Press this button again while depressing the CTL button,
and the blue (B signal) will be projected again.
16. FOCUS
/
button
Press the FOCUS +/- button while depressing the CTL button, to make lens focus adjustment. (See
page 20)
17. ZOOM
/
button
Press the ZOOM +/- button while depressing the CTL button, to make lens zoom adjustment. (See
page 20)
18. CTL button
The CTL button is a shift function used to access alternative functions on other buttons.
NOTE
•
The following buttons cannot be used with this projector:
WHITE BAL., PICTURE, IMAGE, INFO., PIXEL., AUTO, SOUND, OSD
Notes for Use of the Remote Control:
• Do not drop or handle the remote control in a careless manner.
• Do not allow the remote control to be splashed with water or any other liquid. If the remote
should get wet accidentally, wipe the liquid off immediately.
• Be sure to use the remote control in a place free from heat or dampness as far as practicable.
• Do not set dry batteries on the remote control. You can operate the remote control of this
projector only when it is connected to the projector with the supplied remote control cable.
Checking the Supplied Items and the Names of the Projector Parts
13
Advertisement
Table of Contents
